Table of Contents
Advertisement
Super X13DEG-QT User's Manual
NVMe Firmware Source
Use this feature to select the NVMe firmware to support system boot. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
VGA Priority
Use this feature to select the graphics device to be used as the primary video display for
system boot. The options are Onboard and Offboard.
For the following features, please note that:
Note 1: The number of slots and slot naming vary based on your motherboard features.
Note 2: The option of Legacy is available when "Boot Mode Select" is set to Dual or
Legacy.
Note 3: Refer to Boot submenu in the BIOS Setup main menu to set "Boot Mode
Select".
Onboard Video Option ROM
Select EFI to allow you to boot the computer using the Extensible Firmware Interface (EFI)
device installed on the onboard video port. The options are Disabled, EFI, and Legacy.
P1 SLOT2 PCIe 5.0 X16 OPROM / P1 SLOT4 PCIe 5.0 X16 OPROM / P2 SLOT5 PCIe
5.0 X16 OPROM / P2 SLOT7 PCIe 5.0 X16 OPROM / P2 SLOT9 PCIe 5.0 X16 OPROM
/ P1 SLOT10 PCIe 5.0 X16 OPROM / P2 SLOT11 PCIe 5.0 X16 OPROM / M.2_HC1
OPROM / M.2_HC2 OPROM
Select EFI to allow you to boot the computer using the EFI device installed on the PCIe slot
specified. The options are Disabled, Legacy, and EFI.
Onboard LAN Device
Select Enabled to use onboard LAN device. The options are Disabled and Enabled.
Onboard LAN1 Option ROM (Available when "Onboard LAN Device" is set to
Enabled)
Use this feature to select the type of device installed in LAN Port 1 used for system boot.
The options are Disabled and EFI. Please note that available options are based on your LAN
OPROM ROM.
P1 NVME0 OPROM / P1 NVME1 OPROM / P1 NVME2 OPROM / P1 NVME3 OPROM /
P2 NVME0 OPROM / P2 NVME1 OPROM / P2 NVME2 OPROM / P2 NVME3 OPROM
Use this feature to select which firmware function to be loaded for the NVMe device in this
slot. The options are Disabled, Legacy, and EFI.
136
Advertisement
Table of Contents
