Supermicro X13DEG-QT User Manual page 164

Super X13DEG-QT User's Manual
Set User Password (Available when "Security Frozen:" above is No)
Press <Enter> to set the HDD user password.
P1: (Storage Device Name)
This section is available when the storage device is detected by the BIOS. Select this device.
Press <Enter> and the following information is displayed:
•
HDD Password Description:
•
HDD PASSWORD CONFIGURATION:
•
Security Supported:
•
Security Enabled:
•
Security Locked:
•
Security Frozen:
•
HDD User Pwd Status:
•
HDD Master Pwd Status:
Set User Password (Available when "Security Frozen:" above is No)
Press <Enter> to set the HDD user password.
Secure Boot
Note: For detailed instructions on how to configure Security Boot settings, please refer
to the Security Boot Configuration User's Guide posted on the web page under the
link: https://www.supermicro.com/support/manuals/.
The following information is displayed:
•
System Mode
•
Secure Boot
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
164