Table of Contents
Advertisement
Power On & BMC/BIOS Status LED Button
The Power On and BMC/BIOS Status LED button is located on Pin 1 and Pin 2 of JF1.
Momentarily contacting both pins will power on/off the system or display BMC/BIOS status.
Refer to the tables below for more information.
Green: solid on
BMC/BIOS blinking green at 4Hz
BIOS blinking green at 4Hz
BMC blinking red x2 (2 blinks red) at 4Hz, 1 pause at 2Hz (on-on-off-off)
BMC/BIOS blinking green at 1Hz
Reset Button
The Reset Button connection is located on Pin 3 and Pin 4 of JF1. Momentarily contacting both
pins will reset the system. Refer to the table below for pin definitions.
JF1
1
1
Power Button
2
Reset Button
3.3V
Red+
(Blue LED_Cathode_UID)
NIC2 (Activity) LED
NIC1 (Activity) LED
ID_UID/3.3V Stby
3.3V
Key
NMI
19
Power Button & BIOS/BMC Status LED Indicator
Pin Definitions (JF1)
Pin#
Definition
1
Signal
2
Ground
Power Button
LED Indicator Status
Status
Reset Button
Pin Definitions (JF1)
Pin#
Definition
3
Reset
4
Ground
2
Ground
Ground
Power Fail (for LED6)
Blue+
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
NIC2 (Link) LED
NIC1 (Link) LED
HDD LED
FP PWR LED
Key
Ground
20
69
Chapter 2: Installation
Event
System power on
BMC/BIOS checking
BIOS recovery/update in progress
BMC recovery/update in progress
Flash not detected or golden image
checking failure
1. PWR Button
2. Reset Button
Advertisement
Table of Contents
