Supermicro X13DEG-QT User Manual page 117

fADR Configuration (Available when "Enable fADR" is set to Enable)

Number of Cores
Use this feature to set the number of CPU cores to be involved in the fADR event. The
options are 1 Core, 4 Cores, and All Cores.
Core Ratio
Use this feature to set the CPU core ratio to be involved in the fADR event. The op-
tions are Auto and Manual.
Core Ratio Value (Available when "Core Ratio" is set to Manual)
Use this feature to enter the core ratio value. The default value is FF.
Mesh Ratio
Use this feature to set the mesh ratio to be involved in the fADR event. The mesh
ratio determines the frequency of data access between CPU cores and caches. The
options are Auto and Manual.
Mesh Ratio Value (Available when "Mesh Ratio" is set to Manual)
Use this feature to enter the mesh ratio value. The default value is FF.
Flush Timeout
Use this feature to set the timeout setting when the data in the CPU cache memory will
be flushed by the applications to persistent memory in the absence of system power.
The options are Auto and Manual.
Flush Timeout Value (Available when "Flush Timeout" is set to Manual)
Use this feature to enter the flush timeout value. The default value is FFF.
DDR 2X Refresh Enable
Select Enable for memory 2X refresh support to enhance memory performance. The
options are Auto, Disable, and Enable.
CXL Type 3 Legacy
Select Enable to use the CXL Type 3 memory device, which can be supported by the
CXL Type 2 flows, for memory bandwidth and capacity expansion. The options are Dis-
able and Enable.
117
Chapter 4: UEFI BIOS