Table of Contents
Advertisement
Connector
Description
MT1_1, MT1_2,
M.2 Device Mounting Holes
MT2_1, MT2_2
P1_NVME0/1,
PCIe 5.0 x8 MCIO Connectors supported by CPU1 with four NVMe connections
P1_NVME2/3
P2_NVME0/1,
PCIe 5.0 x8 MCIO Connectors supported by CPU2 with four NVMe connections
P2_NVME2/3
Intel PCH Powered S-SATA 3.0 Ports with support of SuperDOM devices
S-SATA0, S-SATA1
* DOM: Disk on Module
Serial General Purpose I/O Connection Header (for S-SATA0/S-SATA1 SuperDOM
S-SGPIO1
support)
SlimSAS LP Connectors with support of eight Intel PCH SATA 3.0 connections (RAID 0,
SATA0~3, SATA4~7
RAID 1, RAID 5, and RAID 10 supported)
(P1) SLOT2/4/10,
PCIe 5.0 x16 Slots
(P2) SLOT5/7/9/11
* For Intel SP XCC processors, SLOT11 supports PCIe Gen. 4 link.
UID-SW
Unit Identifier (UID) Switch / BMC Reset Button
USB0 – USB3 (3.0)
Rear I/O USB Ports (USB 3.0)
USB4/5 (3.0)
Front-accessible USB 3.0 Header with support of two USB 3.0 connections
USB6 (3.0)
Internal USB 3.0 Vertical Type-A Connector
VGA
Rear I/O VGA Port
Note: For detailed instructions on how to configure VROC RAID settings, please refer
to the VROC RAID Configuration User's Guide posted on the web page under the link:
https://www.supermicro.com/support/manuals/.
13
Chapter 1: Introduction
Advertisement
Table of Contents
