Table of Contents
Advertisement
Super X13DEG-QT User's Manual
Load Authentication-Key (Available when "KMS Security Policy" and "TPM Security
Policy" are set to Disabled)
The options are Disabled and Enabled. The default setting is Disabled. Set this feature to
Enabled; save settings (you can press <F4>) and reboot the system for changes to take effect.
While booting, the BIOS will automatically load the Authentication-Key (filename: TPMAuth.
bin) from the USB flash drive. Afterwards, the default setting will be set to Disabled by the
BIOS.
Note 1: Be sure to connect a USB flash drive with the Authentication-Key (filename:
TPMAuth.bin) to your system before the system reboot.
Note 2: Be sure to save the Authentication-Key (filename: TPMAuth.bin) to the USB
flash drive and have a backup. Please load the Authentication-Key (filename: TPMAuth.
bin) after installing a TPM device. Otherwise, the TPM function can not work properly.
146
Advertisement
Table of Contents
