Supermicro X13DEG-QT User Manual page 165

CSM Support
If this feature is set to Enabled, legacy BIOS boot mode will be supported by the system.
Please make sure you use the device with compatibility support for legacy boot. The options
are Disabled and Enabled.
Restore Factory Keys (Available when "Secure Boot Mode" is set to
Custom)
Select Yes to restore manufacturer default keys used to ensure system security. The options
are Yes and No.
Reset To Setup Mode (Available when "Secure Boot Mode" is set to
Custom)
This feature resets the system to Setup Mode.
Enter Audit Mode (Available when "Secure Boot Mode" is set to
Custom)
Select Ok to enter the Audit Mode workflow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
Enter Deployed Mode / Exit Deployed Mode (Available when
"Secure Boot Mode" is set to Custom)
Select Ok to reset system to the User Mode or to the Deployed Mode.
Key Management (Available when "Secure Boot Mode" is set to
Custom)
The following information is displayed.
•
Vendor Keys
Provision Factory Defaults
Select Enabled to install provision factory default settings after a platform reset while the
system is in the Setup Mode. The options are Disabled and Enabled.
Restore Factory Keys (Available when any secure keys have been
installed)
Select Yes to restore manufacturer default keys to ensure system security. The options
are Yes and No. Selecting Yes will reset system to the Deployed mode.
165
Chapter 4: UEFI BIOS