Table of Contents
Advertisement
Super X13DEG-QT User's Manual
DIMM Installation
Note: The DDR5 DIMM module is NOT hot-swappable
and be sure to disconnect power for a minimum of
twenty seconds before inserting or removing it.
1. Insert the desired number of DIMMs into the memory
slots based on the recommended DIMM population tables
in the previous section. Locate DIMM memory slots on
the motherboard as shown on the right.
2. Push the release tabs outwards on both ends of the
DIMM slot to unlock it.
3. Align the key of the memory module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the memory module into the slot.
Release Tabs
Key
Notches
Push both ends
straight down into
the memory slot.
58
UID-LED
UID-SW
COM1
VGA
FAN8
LAN
USB2/3 (3.0)
BMC
FAN6
FANB
CTRL
COM2
BMC_LAN
LEDBMC
LAN2
LAN1
USB0/1 (3.0)
CPU2
JIPMB1
JPFR1
JSTBY1
JRK1
X13DEG-QT
REV:1.10
DESIGNED IN USA
BAR CODE
IPMI CODE
MAC CODE
SAN MAC
JPME2
P2_NVME0/1
P2_NVME2/3
BT1
JBT1
S-SGPIO1
JF1
LEDPWR
PCH
JSEN1
JSD1 JSD2
SATA4~7
USB6 (3.0)
CPU1
P1_NVME0/1
1
USB4/5 (3.0)
FAN4
JTPM1
AUDIO_FP
FAN3
FANA
JPAC1
JHD_AC1:Audio AC97 and HD audio jumper
JPAC1:AUDIO
1-2:ENABLE
2-3:DISABLE
JPAUX1:WOL of onboard LAN
1-2:ENABLE
2-3:DISABLE
JPTG1:10Gb LAN
1-2:ENABLE
2-3:DISABLE
FAN7
JNCSI1
BIOS LICENSE
MT2_2
MT1_2
MT2_1
MT1_1
M.2-C2
M.2-C1
MT2_F
MT1_F
M2_2_LED1
M2_1_LED1
FAN10
FAN9
P1_NVME2/3
FAN5
JPW1
FAN2
FAN1
Advertisement
Table of Contents
