Supermicro X13DEG-QT User Manual page 71

NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on Pin 11
and Pin 12 of JF1, and LAN port 2 is on Pin 9 and Pin 10. Refer to the tables below for pin
definitions.
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
11 NIC 1 Activity LED
ID_UID Button/HDD LED
The UID Button/HDD LED connection is located on Pin 13 and Pin 14 of JF1. The UID Button
is used for a chassis that supports a front UID Button. The front UID Button functions in the
same way as the rear UID Button; both are for input only and cannot be used for output.
When this LED is blinking green, it indicates HDD is active. Attach a cable to Pin 13 and Pin
14 to show ID_UID status and hard drive activity. Refer to the tables below for pin definitions.
ID_UID/HDD LED
Pin Definitions (JF1)
Pin# Definition
13 ID_UID/3.3V Stdby
14 HDD Activity
JF1
1
Power Button
Reset Button
3.3V
Red+
(Blue LED_Cathode_UID)
NIC2 (Activity) LED
NIC1 (Activity) LED
ID_UID/3.3V Stby
3.3V
Key
NMI
19
Pin# Definitin
10 NIC 2 Link LED
12 NIC 1 Link LED
2
Ground
Ground
Power Fail (for LED6)
Blue+
(Red OH/Fan Fail/PWR Fail for LED5/Blue UID LED)
1
NIC2 (Link) LED
2
NIC1 (Link) LED
3
HDD LED
FP PWR LED
Key
Ground
20
71
Chapter 2: Installation
LAN1/LAN2 LED
LED Indicator Status
Color State
NIC 2: Blinking green LAN 2: Active
NIC 1: Blinking green LAN 1: Active
ID_UID/HDD LED
Pin Definitions (JF1)
Color State
Blinking Green HDD Active
1. NIC2 (LAN 2) LED
2. NIC1 (LAN 1) LED
3. ID_UID/HDD LED