Supermicro X13DEG-QT User Manual page 139

hierarchies. A user with privacy concerns can disable the endorsement hierarchy while still
using the storage hierarchy for TPM applications, permitting the platform software to use the
TPM. The options are Disabled and Enabled.
PH Randomization (for TPM version 2.0 and above)
Select Enabled for Platform Hierarchy (PH) Randomization support, which is used only during
the platform developmental stage. This feature cannot be enabled in the production platforms.
The options are Disabled and Enabled.
Disable Block Sid (Available when your motherboard supports NVMe)
Select Enabled to allow SID authentication to be performed in TCG Storage devices. The
options are Disabled and Enabled.
Supermicro BIOS-Based TPM Provision Support
If this feature is set to Enabled, Supermicro BIOS-based TPM provision will be supported.
The options are Disabled and Enabled.
Note: Enabling this feature will lock your TPM on the production platform, and you will
not be able to delete the NV indexes.
TXT Support
Select Enabled to enable Intel Trusted Execution Technology (TXT) support to enhance
system integrity and data security. The options are Disabled and Enabled.
Note 1: If this feature is set to Enabled, be sure to disable Device Function On-Hide
(EV DFX) support when it is present in the BIOS for the system to work properly.
Note 2: For more information on TPM, please refer to the TPM manual at
supermicro.com/manuals/other/AOM-TPM-9670V_9670H.pdf.
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Enable this feature for HTTPS boot to check the hostname of the TLS certificates to see if it
matches the host name provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
Priority of HTTP Boot
Instance of Priority 1 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 1.
139
Chapter 4: UEFI BIOS
https://www.