Supermicro X13DAI-T User Manual page 120

Super X13DAI-T User's Manual
IIO eDPC Interrupt (Available when your system supports this feature and when
"IIO eDPC Support" is set to On Fatal Error/On Fatal and Non-Fatal Errors)
Select Enable to enable IIO eDPC Interrupt support. The options are Disable and Enable.
IIO eDPC ERR_COR Message (Available when your system supports this feature
and when "IIO eDPC Support" is set to On Fatal Error/On Fatal and Non-Fatal
Errors)
If this feature is set to Enable, an IIO eDPC error correction message will be displayed.
The options are Disable and Enable.
CXL Security Level
By defining security protocols, CXL standards provide protection against the data security
threats. Use this feature to set the CXL security level for data transiting the CXL link. The
options are Fully Trusted, Partially Trusted, Untrusted, and Auto.
•
Fully Trusted: This option allows the CXL device to access CXL.$ for both host-
attached and device-attached memory ranges in the write-back (WB) address space.
•
Partially Trusted: This option allows the CXL device to access CXL.$ for device-
attached memory ranges only.
•
Untrusted: If this option is selected, the host (your system) will abort all requests on
CXL.$.
•
Auto: This option is based on Si Compatibility.
CXL Header Bypass
Set this feature to enable or disable the CXL header bypass. The options are Disable
and Enable.
South Bridge
The following information is displayed:
•
USB Devices:
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy
support if there are no legacy USB devices present. Select Disabled to have all USB
devices available for EFI applications only. The options are Enabled, Disabled, and Auto.
120