Supermicro X13DAI-T User Manual page 154

Super X13DAI-T User's Manual
CHAP Secret (Available when "CHAP Authentication" is set to Enabled)
Use this feature to specify the CHAP secret (password) of the second target. The valid
value is 12–16 (characters).
Secondary Device

Secondary Device
Use this feature to enter the secondary device MAC address in the XX:XX:XX:XX:XX:XX
format.
Use Independent Target Portal
Set this feature to use the independent target portal with multipath I/O enabled. The op-
tions are Disabled and Enabled.
Use Independent Target Name
Set this feature to use the independent target name with multipath I/O enabled. The op-
tions are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
The following information is displayed:
•
Link Status
•
Physical Link Speed
•
Chip Type
•
PCI Device ID
•
Bus: Device: Function
•
Permanemt MAC Address
•
Virtual MAC Address
Restore Defaults
Use this feature to reset the network adapter settings to factory defaults.
154