Supermicro X13DAI-T User Manual page 137

Supermicro KMS Server Configuration
Note: Be sure to configure all the features in the section of Supermicro KMS Server
Configuration and the feature of "KMS Security Policy"
can communicate with the KMS server.
Supermicro KMS Server IP address
Use this feature to set the Supermicro Key Management Service (KMS) server IPv4 address
in dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to set the second Supermicro KMS server IPv4 address in dotted-decimal
notation.
Supermicro KMS TCP Port number
Use this feature to set the TCP port number used in Supermicro KMS Server. The valid range
is 100–9999. The default setting is 5696. Do not change the default setting unless a different
TCP port number has been specified and used in the Supermicro KMS Server.
KMS Time Out
Use this feature to set the KMS server connecting timeout (in seconds). The default setting
is 5 (seconds).
TimeZone
Use this feature to set the correct time zone. The default setting is 0 (not specified).
Client UserName
Press <Enter> to set the client identity (UserName). The maximum length is 63 characters.
Client Password
Press <Enter> to set the client identity (Password). The maximum length is 31 characters.
(page
137
Chapter 4: UEFI BIOS
141) so that your system