Supermicro X13DAI-T User Manual page 153

Chapter 4: UEFI BIOS
TCP Port
Use this feature to configure the first target TCP port number (1–65535). The default
setting is 3260.
Boot LUN
Use this feature to configure the first target boot LUN number (0–255). The default set-
ting is 0.
iSCSI Name
Usee the feature to create an iSCSI first target name.
CHAP ID (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the CHAP ID of the first target (up to 128 characters).
CHAP Secret (Available when "CHAP Authentication" is set to Enabled)
Use this feature to specify the CHAP secret (password) of the first target. The valid value
is 12–16 (characters).
iSCSI Second Target Parameters

Connect
Use this feature to enable or disable the second target establishment. The options are
Disabled and Enabled.
IP Address
Use this feature to configure the second target IP address.
TCP Port
Use this feature to configure the second target TCP port number (1–65535). The default
setting is 3260.
Boot LUN
Use this feature to configure the second target boot LUN number (0–255). The default
setting is 0.
iSCSI Name
Usee the feature to create an iSCSI second target name.
CHAP ID (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the CHAP ID of the second target (up to 128 characters).
153