Table of Contents
Advertisement
Super X13DAI-T User's Manual
DIMM Installation
Note: The DDR5 DIMM module is NOT hot-swappable
and be sure to disconnect power for a minimum of
twenty seconds before inserting or removing it.
1. Insert the desired number of DIMMs into the memory
slots based on the recommended DIMM population tables
in the previous section. Locate DIMM memory slots on
the motherboard as shown on the right.
2. Push the release tabs outwards on both ends of the
DIMM slot to unlock it.
3. Align the key of the memory module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the memory module into the slot.
Release Tabs
Key
Notches
Push both ends
straight down into
the memory slot.
56
VGA
LAN2
USB4/5 (3.0)
JPTG1
BMC
LAN
CTRL
FAN8
LEDBMC1
CPU2
FAN7
JNCSI1
FAN6
FAN5
COM1
BIOS
M.2-C1
LICENSE
(NVME ONLY)
MH10
MH11
X13DAI-T
MAC CODE
BAR CODE
LED4
REV:1.00
IPMI CODE
CM CODE
DESIGNED IN USA
JTP1
T-SGPIO1
USB0/1
JBT1
(CLEAR CMOS)
JVRM2
JVRM1
MH13
JPG1
PCH
MH12
FANC
USB6/7 (3.0)
USB8 (3.1 Gen 2)
JS1
(SATA0~7)
FANB
BT1
CPU1
JSD1
JSD2
M.2-C2
FANA
LED7
(NVME ONLY)
I-SATA9
I-SATA8
FAN4
FAN3
JL1
AUDIO FP
LAN1
USB2/3 (3.0)
JAUDIO1
FAN9
JPWR2
JPWR3
JPWR1
JPI2C1
(PWR I2C)
JF1
FAN1
FAN2
Advertisement
Table of Contents
