Table of Contents
Advertisement
Super X13DAI-T User's Manual
Adapter Error Recovery
Use this feature to enable the recovery of firmware from fatal errors without manual
intervention, host reboot, or power cycle. The options are Disabled and Enabled.
MBA Configuration Menu
Option ROM
Use this feature to control the enablement of legacy boot protocols in Option ROM. The
options are Disabled and Enabled.
Legacy Boot Protocol
Use this feature to specify the non-UEFI boot protocol. The options are PXE, iSCSI, and
NONE.
Boot Strap Type
Use this feature to specify the boot strap method used to boot to the operating system.
Options are Auto Detect, BBS, Int 18h, and Int 19h.
Hide Setup Prompt
Use this feature to specify whether to display or hide the legacy Option ROM setup prompt
during system Power-on Self Test (POST). The options are Disabled and Enabled.
Setup Key Stroke
Use this feature to configure key strokes to invoke configuration menu. The options are
Ctrl-S and Ctrl-B.
Banner Message Timeout
Use this feature to specify the number of seconds that the Option ROM banner is displayed
during POST. The default is 7.
Pre-boot Wake On LAN
This feature allows you to remotely wake up the system from standby mode. The options
are Disabled and Enabled.
VLAN Mode
Use this feature to enable or disable VLAN mode. The options are Disabled and Enabled.
VLAN ID (1–4094)
If VLAN Mode is enabled, use this feature to specify the VLAN ID. The valid VLAN ID range
is from 1 to 4049. The default is 1.
150
Advertisement
Table of Contents
