Table of Contents
Advertisement
RemoteUpdate
The
RemoteUpdate
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
"Before using for the first time –
Miele@home").
The RemoteUpdate function is used for
updating the software in your combina-
tion steam oven. If an update is avail-
able for your combination steam oven, it
will automatically download it. Updates
will not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your combination steam
oven as usual. However, Miele recom-
mends installing updates.
Activating/deactivating
The RemoteUpdate function is activated
as standard. Available updates will be
downloaded automatically but will only
be installed if you initiate installation
manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
menu option is only
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear in your combina-
tion steam oven display if a software up-
date is available.
You can install the update immediately
or postpone this until later. When the
combination steam oven is switched on
again, you will be reminded about the
update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the combination steam
oven off during the update. Otherwise,
the update will be aborted and will not
be installed.
- Some software updates can only be
carried out by the Miele Customer
Service Department.
Settings
51
Advertisement
Table of Contents
