Name Plate; Safety Instructions - Beko DRYPOINT RS HP50 NA Series Instructions For Installation And Operation Manual

1

Name plate

The name plate is on the back of the dryer and comprises all primary data of the device. Always refer to these when
contacting the manufacturer or the sales department.
All guarantee claims will expire in the event that the name plate is modified or removed.
2

Safety instructions

Pos : 2 /Beko Tec hnisc he Dokumentati on/Gl obal e T exte/Allgemei ner Hi n weis BM @ 0\mod_1183615737313_6.doc @ 4004
Pos : 3 /Beko Tec hnisc he Dokumentati on/Sic herheit/Hi nweis Anlei tung BEKO @ 0\mod_1184147787557_6.doc @ 5758
Please check whether or not these instructions correspond to the device type.
Please adhere to all advice given in these operating instructions. They include essential information which
must be observed during installation, operation and maintenance. Therefore, it must be ensured that these
operating instructions are read by the fitter and the responsible operator / certified skilled personnel prior
to installation, start-up and maintenance.
The operating instructions must be accessible at all times at the place of application of the DRYPOINT
RS 15-550 HP50 NA high pressure compressed-air refrigeration dryer.
In addition to these operating instructions, local and national regulations need to be observed, where
required .
Ensure that operation of the DRYPOINT
dryer only takes place within the permissible limit values indicated on the name plate. Any deviation from
these limit values involves a risk for persons and for the material, and may result in malfunction or a
breakdown.
After installing the device correctly and in accordance with the instructions in this manual, the dryer is ready
to operate, further settings are not required. Operation is fully automatic and maintenance is limited to
several examinations and cleaning measures which are described in the following chapters.
This manual must be available at all times for future reference and is a constituent part of the dryer.
If you have any queries regarding these installation and operating instructions, please contact BEKO
TECHNOLOGIES GMBH.
DRYPOINT® RS 15-550 HP50 NA
®
RS 15-550 HP50 NA high pressure compressed-air refrigeration
Name plate
®
5