Remote Interface Functions - Wine Guardian D088 Installation, Operation And Maintenance Manual

Remote Interface Functions

"Cool" Symbol
"Heat" Symbol
Settings and
Defrost Area
Temperature
On/Off Button
How To:
Turn system
on/off
Change
temperature
Change
humidity
Change
Settings
Cooling/
Heating / Auto
Up Button Down Button
• Press the "On/Off" button once.
Note: There is a five (5) minute time
delay before the system turns on or
turns off.
• Press the "Up" arrow once. The display
will show the existing temperature
setpoint.
• Press the up or down arrow buttons to
adjust the temperature to the desired set
point.
• Press the "Up" arrow once. This display
will show the existing temperature
setpoint.
• Press the "Settings" button once to
display the "Humidity" setpoint. • Press
the "Up" or "Down" arrows to adjust the
humidity to the desired set point.
Note: A Wine Guardian humidifier
must be installed and Setting 6 set to
"1" or "2" before the controller will let
you change percent humidity.
• Press the Setting button once to display
the setting function at the bottom of the
screen.
• Press the Settings button again to scroll
through settings for cool only, heat only or
heat/cool only (auto mode).
Alarms
Battery Life
Humidity
Settings Button
37