Wine Guardian D088 Installation, Operation And Maintenance Manual page 10

access doors are provided to facilitate cleaning and maintenance, duct connections,
and access to components and wiring. The condenser coils have pre-filters on the inlet
to prevent dust and dirt from fouling the coils, thereby reducing capacity. Each unit has
at least three discharge outlets on both the evaporator and the condenser coils to
facilitate custom installations. Water-cooled units have copper straight tube connections
for both cooling water inlet and outlet.
Each unit is provided with a pre-wired and tested electronic digital thermostat for remote
mounting in the cellar. The thermostat has multiple control functions for the fans,
cooling, and heating. It has a fully automatic mode to switch between heating and
cooling (for units configured with a heater). Compressors are rotary, self-lubricating,
permanently sealed, hermetic reciprocating type compressors, with internal overload
protection and capacitor start with a minimum of one-year service and two-year parts
manufacturer's warranty and an optional five-year compressor warranty. Compressors
are mounted on rubber-in-shear isolators to reduce noise and vibration. Electric power
is supplied by a single, factory-furnished cord and plug. All external controls are digital
and proprietary to Wine Guardian products. Only the approved communication cable
and Wine Guardian controllers are suitable for proper system operation.
10