Operation Processes - Ablerex KRONOS Series Installation And Operation Manual

3.4 Operation Processes

10-20kVA
3.4.1 Normal Mode Start-up
(1) In the rear of UPS, switch ON the AC Power switch.
(2) Close UPS Mains Input and Bypass Input Switches if equipped.
(3) Hold down
【 setting page 】 .
(4) Press to select Normal Mode on LCD display.
(5) Press to excute the command on LCD disaply.
(6) Hold down
minutes, the rectifier will be started.
and then click on LCD display,and it will take you to the
Mode
and then click to return to flow chart Display. Wait for few
38
30-40kVA