Advertisement
4.
OPERATION
4.1
External battery operating procedures
4.11
Please follow the parameter table, series battery and ensure proper battery voltage first.
4.12
Red battery cable connects to positive and black cable for negative. Battery cable and polarity.
4.13
must be connected securely. Do not short. The positive and negative of the battery electrode or
joint reversely.
When connecting the battery cable, occurrence of spark in the joints is normal phenomenon.
4.2
Operation Modes
4.12
Press " POWER "for 3 seconds to turn on or turn off the inverter.
Double press "POWER" fast to select "PRO AC"(AC Preferred) or "PRO SOL"(solar preferred)
Default= PRO AC. (for solar inverter ONLY )
If " PRO AC" is selected, the inverter will be powered by AC after it's fully charged. If " PRO
SOL" is However this may reduce the battery life due to frequent charging and discharging
4.13
<< HOW to settle " BATT "
Press 'BATT' and ▲flashes. Keep on pressing it till it reaches the battery type you
Choose, then press 'ENTER 'to set it up. Battery type includes "GEL" (Suitable for Gel battery).
"LiFeP04"(Suitable for LiFeP04 battery) and "OP-LE"(Suitable for Lead-Acid battery).
4.14
<< HOW to settle " CHR "
Press "CHR"and.▲flashes. Keep on pressing it till it reaches the charging current you want, then press
'ENTER 'to set it up. You can choose 10A or 20A for standard models, MAX' is only available for
special designed models.
4.15
<< HOW to settle " MODE "
Press "MODE" and you will see.▲flashes.in turns between "UPS MODE" and "INV MODE", keep on
pressing it till it reaches the mode you need, then press"ENTER"to set it up.
4.16
Press "ENTER" about 4 seconds to enter Advanced Menu
The first page is to select the battery voltage of turning off. There are options of 10.0V,10.5V, 10.8V and
11.1V.
Press "BATT' to previous option, press "CHR" to next option, and then Press "ENTER" to select the option
temporarily and turn to next page.
The second page is to select the battery voltage of switching to AC charging. There are options of 11.4V,
l l. 6V, l l.8V and 12.0V.
The third page is to select "PRO AC"(AC preferred) or "PRO SOL"(solar preferred).
The fourth page is confirmation page, select "YES" to confirm the selection of previous 3 pages, Select "NO"
to cancel.
Advertisement
