Codebar Mechanism - Teletype 28 Manual

ISS 8, SECTION 573-115-700TC
4.03 Codebar Mechanism
TRANSFER LEVERS
4
1 - - - - - - - - - - - - - - C O D E BAR SHIFT LEVER
2
3
c
5
CODE BAR SHIFT LEVER LINK--_.,
( FRONT VIEW)
- - - - - - - - - - - - R O L L E R
CODE BAR SHIFT LEVER DRIVE ARM
REQUIREMENT
CODE BAR SHIFT LEVER LINK IN THE
UPPERMOST POSITION.
THERE SHOULD BE SOME CLEARANCE
BETWEEN THE TOP OF THE ROLLERS AND
THE TOP OF THE CAM SLOTS IN THE CODE
BAR SHIFT LEVERS
MAX. 0.025 INCH
ON THE CLOSEST LEVER.
TO ADJUST
LOOSEN THE CLAMP SCREW. POSITION
THE CODE BAR SHIFT LEVER DRIVE
ARM ON ITS SHAFT TO MEET THE
REQUIREMENT AND TO PROVIDE SOME
END PLAY, NOT MORE THAN 0.006.1NCH.
TIGHTEN SCREW.
CLAMP SCREW
CODE
BAR
( RIGHT
SIDE
VIEYt)
SHIFT
LEVER DRIVE ARM
Page 127