Teletype 28 Manual page 65

2. 62 Spacing Mechanism (Cont.)
FEED PAWL
RIGHT MARGIN WITH
ISS 8, SECTION 573-115-700TC
AUTOMATIC CARRIAGE RETURN-LINE
FEED RING
AUTOMATIC CARRIAGE RETURN -LINE FEED RING
!
~ey
REQUIREMENT (ON UNITS SO EQUIPPED)
TYPE BOX CLUTCH DISENGAGED •. CARRIAGE
POSITIONED TWO SPACES BEFORE CHARACTER
ON WHICH AUTOMATIC CARRIAGE RETURN-LINE
FEED IS TO OCCUR. FRONT FEED PAWL FARTHEST
ADVANCED.
CLEARANCE BETWEEN EXTENSION ON RING
AND AUTOMATIC CARRIAGE RETURN-LINE FEED
BELL CRANK.
MIN. 0.040 INCH --- MAX. 0.055 INCH
TO ADJUST
POSITION RING WITH FOUR INDICATED
MOUNTING SCREWS LOOSENED.
SPACING CUT-OUT TRANSFER BAIL SPRING
SEE PAR. 2.44.
(FRONT VIEW)
MOUNTING SCREWS
AUTOMATIC CARRIAGE RETURN-LINE
FEED BELL CRANK
NOTE
RANGE OF LINE ADJUSTMENT IS FROM
0 TO 85 CHARACTERS
NOTE: FOR ADJUSTMENT ON EARLIER MODELS SEE PAR. 4.19
Page 65