3.3 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid damaging your
motherboard, it is important to handle it very carefully. The following measures are generally
sufficient to protect the system PCBs from ESD.
Precautions
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing any PCB (printed circuit board) from its
antistatic bag.
•
Handle PCBs by their edges only; do not touch its components, peripheral chips, memory
modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
Put the PCBs back into their antistatic bags when not in use.
•
Use only the correct type of onboard CMOS battery. To avoid possible explosion, do not
install the onboard battery upside down.
Chapter 3 Maintenance and Component Installation
23