Supermicro SuperServer SYS-E302-13AD User Manual page 37

HDMI and DP Port
One High Definition Multimedia Interface (HDMI) port is on the I/O back panel. This connector
is used to display both high definition video and digital sound through an HDMI-capable
display. HDMI 2.0 allows faster frame rates and is backward compatbile with previous HDMI
versions. This port provides Intel HD Graphics digital output with resolution up to 4096 x 2160
at 60 Hz Refresh Rate with HDR. There is also a DisplayPort (DP) on the I/O back panel.
DisplayPort, developed by the VESA consortium, delivers digital display and fast refresh rate.
It can connect to virtually any display device using a DisplayPort adapter for devices such
as VGA, DVI or HDMI.
LAN Ports
Two 2.5 Gigabit (LAN1/2) Ethernet ports are located on the I/O back panel. These ports
accept RJ45 cables. Refer to the table below for pin definitions.
Universal Serial Bus (USB) Ports
There are six USB 3.2 Gen 2 x1 ports (USB0/5, 6/7, 8/9). The motherboard also has two
front access USB 2.0 headers (USB1/2, 3/4). The onboard headers can be used to provide
front side USB access with a cable (not included).
Back Panel USB 3.2 Gen 2 Ports
(USB0/5, 6/7, 8/9)
Pin Definitions
Pin# Definition Pin#
1 GND 11
2 TX1+ 12
3 TX1- 13
4 GND 14
5 RX1+ 15
6 RX1- 16
7 GND 17
8 D1+ 18
9 D1- 19
10 VBUS1 20
LAN Port
Pin Definition
Pin# Definition Pin#
1 TX_D1+ 5
2 TX_D1- 6
3 TX_D2+ 7
4 TX_D2- 8
Definition
GND
TX2-
TX2+
GND
RX2-
RX2+
GND
D2+
D2-
VBUS2
37
Chapter 4 Motherboard Connections
Definition
TX_D3+
TX_D3-
TX_D4+
TX_D4-
Front Panel USB 2.0 Header
(USB1/2, 3/4)
Pin Definitions
Pin# Definition Pin#
1 +5 V 2
3 USB_PN2 4
5 USB_PP2 6
7 Ground 8
9 Key 10
Definition
+5 V
USB_PN3
USB_PP3
Ground
Ground