Language Selection; Check Mode - Dentsply Sirona X-Smart Apex Locator User Manual

6.8.2 Language selection

To modify the user interface language:
Enter the Settings Menu and tap the Language tab.
Select your preferred language from the available languages list
– see Fig. 14.
Use the Up
available languages.

6.8.3 Check Mode

In case measurement indication is not detected this built-in Check
feature enables to automatically test the basic functions of the
device in a first step, followed by the test of its accessories in a
second step.
To activate the Check mode feature, follow the next steps:
Disconnect the measurement cable/charger from the device.
Enter the Settings Menu and select the Check Mode feature.
An automated internal test will start, and the results will be
shown on the screen. Either ok -
fully operates or "Error – Please contact your distributor".
Note
If the device functional check is ok, proceed to the cables
functional check.
and Down arrows icons to see all the
Fig. 14
17/38
to indicate that the device