Group 9: Communication Parameters - Delta VFD004L11A User Manual

Send Quote Requests to info@automatedpt.com
VFD-L Series

Group 9: Communication Parameters

9 - 00 Communication Address
Settings d 1 to 247
This parameter can be set during operation.
If the AC drive is controlled by RS-485 serial communication, the communication
address must be set via this parameter.
9 - 01 Transmission Speed
Settings
This parameter can be set during operation.
Users can set parameters and control the operation of the AC drive via the RS-485
serial interface of a personal computer. This parameter is used to set the transmission
speed between the computer and AC drive.
9 - 02 Transmission Fault Treatment
Settings
R S 4 8 5
C o m p u te r
d 1
V F D - L
d 0 Baud rate 4800 (data transmission speed: bits / second)
d 1 Baud rate 9600 (data transmission speed: bits / second)
d 2 Baud rate 19200 (data transmission speed: bits / second)
d 0 Warn and keep operating
d 1 Warn and RAMP to stop
d 2 Warn and COAST to stop
d 3 No Warning and keep operating
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
d 3
d2
V F D - L
V F D - L
5-40
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
Factory Setting: d 1
Factory Setting: d 1
Factory Setting: d 0