Advertisement
Quick Links
Advertisement
Related Manuals for Delta DT-2000 Series
Summary of Contents for Delta DT-2000 Series
- Page 1 Operation Manual DT-2000 Motor Series DELTA TECHNOLOGY FIRE SHUTTER MOTORISED OPERATOR...
- Page 2 Operation Manual- DT2000 Manufacturer Delta Technology Pte Ltd 34 Loyang Crescent Singapore 508993, Singapore Email: Enquiry@deltatech.com.sg Website: deltatech.com.sg ! Before Handling the Product ! Observe all safety regulations at all times Handled by competent and trained personnel only Read and understand this manual before handling the product This manual has to be kept over the complete life span of the product CAUTION –...
- Page 3 Operation Manual- DT2000 1. Technical Parameters 1.1 Power Supply Incoming power supply: 3 Phase 400V AC, 50Hz 1.2 Max Motor Power: 1500W 1.3 Feedback (BMS) & Fire Alarm Signal Contact Capacity: 24V DC, 500mA 1.4 Working Environment: Temperature : 0°C to 55°C Relative humidity : ≤95% Atmospheric pressure...
- Page 4 Operation Manual- DT2000 1.6 Overall Motor Dimension 1.7 Control Box Dimension: Page 3 of 8...
- Page 5 Operation Manual- DT2000 2. Main Functions 2.1 Operation The main function of the motor is used to drive a fire shutter up and down with a brake release function to close the fire shutter during emergency. 2.2 Motor’s Brake Release Function When a fire alarm or a smoke detector signal is received, the motor will automatically release the brake to close via gravity.
- Page 6 Operation Manual- DT2000 3. Indicating LED 3.1. Main Indication LED No incoming power supply Power (Green) Incoming power supply Shutter is not in down limit position Down Limit (Red) Shutter is in down limit position Shutter is not in up limit position Up Limit (Red) Shutter is in up limit position 3.2.
- Page 7 Operation Manual- DT2000 4. Electrical Line Drawing Page 6 of 8...
- Page 8 Operation Manual- DT2000 5. Connections 5.1. Connection of Power Supply 5.2. Connection of Push Button Connect the push button cable connection jack to the control box PCB ‘B’ (5pin). All push button contacts are normally open (NO). Use normally open (NO) push buttons only. The push button signal utilizes 24VDC.
- Page 9 Operation Manual- DT2000 5.3. Input & Output Terminal Connections Note: Identify the type of incoming fire alarm signal before connection to the Fire Alarm Input. The control box is designed to receive 2 types of fire alarm input as labeled in the above diagram.
-
Page 10: Troubleshooting
Operation Manual- DT2000 Maintenance & Service Maintenance & Service work must be made by trained staff only Visual inspection of the parts for damage Operation and function check of the motor Regular greasing or oiling of the driving chain and motor reducer box ...