Table of Contents
Advertisement
Send Quote Requests to info@automatedpt.com
CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS
Group 0: User Parameters
0 - 00
Identity Code of AC Motor Drive
Settings
Watts / hp
115V / 230V
This parameter shows the capacity of the AC drive. Users can read Pr.0-01 to check if it
is the rated current of the AC drive corresponds to the identity code shown above and
the current shown below.
0 - 01
Rated Current Display of the AC drive
Settings
V / HP
115V / 230V
This parameter displays the rated current of the AC drive. It will display based on Pr.0-00,
and is read-only.
0 - 02
Parameter Reset
Settings
This setting allows the user to return all parameters to the factory default settings.
0 - 03
Start-up Display Selection
Settings
This parameter can be set during operation.
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
None
40W
100W
d 1
d 2
None
40W
100W
0.4A
0.8A
d 0 to d 9
Not used
d 10 All parameters are reset to be factory settings
d 0
Display the Master Frequency (F)
d 1
Display the actual operation frequency (H)
d 2
Display the content of users-defined unit
d 3
Display the output current (A
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
1/4hp
1/2hp
d 3
d 4
Factory Setting: d ##.#
1/4hp
1/2hp
1.6A
2.5A
5-1
VFD-L Series
Factory setting: d #
1hp
2hp
d 5
d 6
Unit: 0.1A
1hp
2hp
4.2A
7.0A
Factory Setting: d 0
Factory Setting: d 0
5
Advertisement
Table of Contents
