Password Function; Communication Connection - Delta TP Series Instruction Sheet

Password Function

1. The password can be alphabets from A to Z or numbers from 0 to 9. To input English
alphabets, please use numeric keys 0 ~ 4. Press numeric keys 0~4 repeatedly and
the characters will change as the following orders.
0: characters change in a loop as follows: 0→A→B→C→D→E→F→0
1: characters change in a loop as follows: 1→G→H→I→J→K→1
2: characters change in a loop as follows: 2→L→M→N→O→P→2
3: characters change in a loop as follows: 3→Q→R→S→T→U→V→3
4: characters change in a loop as follows: 4→W→X→Y→Z→4
2. If users forgot the password, the password can be cleared by using the following
code: 8888. This universal code will clear the password and internal programs.
TP04G-BL-C will also be reset to factory settings by using this code. Please pay
close attention when using it.

Communication Connection

TP04G-BL-C may connect to a PC by using connection cable DVPACAB530
PC or TP04G-BL-C
TO PC (RS-232)
5
9
6
1
9 PIN D-SUB
PC COM Port
9 PIN D-SUB female
Rx
Tx
GND
TP04G-BL-C may connect to a DVP-PLC by using connection cable DVPACAB215 /
DVPACAB230 / DVPACAB2A30 / DVPACAB2B10
1. DVPACAB215 / DVPACAB230
TO PC or TP04G-BL-C
13
14
1
5
9
6
1
TP04G-BL-C COM Port
2
3
5
25 PIN D-SUB
9 PIN D-SUB
TO TP04G-BL-C
9 PIN D-SUB
9 PIN D-SUB female
3 Tx
2 Rx
5 GND
TO PLC
MINI DIN TERMINAL
- 5 -
F igur e8
1
6
9
5
Figure9
Figure10
Figure11