Table of Contents
Advertisement
Technical Information
Digital Displacement® DDP096 pump and DPC12 controller
Technical specifications
DDP096 pump specifications
Description
Maximum displacement
Available rotation (viewed from shaft end of the pump)
Outlet pressure
1
Inlet pressure (absolute)
Input speed
Flow at specific speed and maximum displacement (theoretical)
Weight (without through drive) approx.
Filling capacity
Mass moment of inertia approx.
Ambient temperature
1
Size hoses or piping appropriately to ensure the minimum pressure condition is satisfied.
2
Highest shaft speed with inlet pressure of 1 bar absolute (2100 rpm with minimum inlet pressure)
Description
Viscosity
Temperature
Cleanliness per ISO4406:1999
Description
Front mounting flange
Front input shaft
©
Danfoss | October 2023
DDP general specifications
The below table contains information for displacement, pressure, torque, and temperature.
DDP fluid specifications
Minimum intermittent
Minimum continuous
Recommended range
Maximum for cold start
Minimum for cold start
Recommended range
Maximum continuous
Maximum intermittent
Recommended
Minimum
Special procedure is required for cold start. Contact your Danfoss representative for details.
DDP mechanical specifications
Value
SAE C 4-bolt
23 tooth 16/32 pitch
Value
96 [5.86]
Clockwise (CW) [R]
Counterclockwise (CCW) [L]
Maximum peak
450 [6526]
Maximum continuous
420 [6091]
Minimum continuous
15 [218]
Minimum
0.8 [12]
Maximum
3.5 [50]
Continuous range
500 - 2200
2
Inlet fill
2500
Maximum
2600
144 [38] @1500 rpm
173 [45.6] @1800 rpm
50 [110]
2.5 [0.66]
0.0013 [0.00096]
Minimum
-40 [-40]
Maximum
105 [221]
Value
8
10
16 - 40
8000
-40 [-40]
20 - 80 [68 - 176]
95 [203]
100 [212]
17/15/12
18/16/13
Notes
Flange 127-4 adhering to ISO 3019-1 (SAE
J744:1996)
Spline per ANSI B92.1b-1996 class 6e
Units
3
3
cm
/rev [in
/rev]
bar [psi]
bar [psi]
-1
min
(rpm)
L/min [US gal/min]
kg [lb]
L [US gal]
2
2
kg·m
[slug·ft
]
°C [°F]
Units
cSt
°C [°F]
BC306384089197en-000202 | 11
Advertisement
Table of Contents
Need help?
Do you have a question about the Digital Displacement DDP096 and is the answer not in the manual?
Questions and answers