Servicing And Maintenance; Cleaning The Belt Grinder; Changing The Grinding Belt - Dick SM-100 Operating Instructions Manual

Servicing and Maintenance

9
9. Servicing and Maintenance
Risk of injuries due to unauthorised or thoughtless switch-
ing on or wrong spare parts
•
•
Risk of injuries due to improper repair work
•
9.1
The belt grinder must be cleaned after each work session.
1 Remove covers (Figure 6.2 – Structure and Function),
2 Remove residual abraded material from the machine, e.g.
3 Tightly screw the covers back on.
9.2
Change the grinding belt if it has become blunt. (Interval: approx.
30 - 50 grinding operations).
Replace the polishing wheel as follows:
Belt grinder SM-100
30
Always disconnect the mains plug before carrying out any
maintenance or repair work on the belt grinder.
Only use original spare parts of Friedr. Dick GmbH & Co. KG.
Any repair work on electric components may only be carried
out by qualified electricians.

Cleaning the belt grinder

using a brush.

Changing the grinding belt

WARNING
WARNING