Intended Use; General Safety Instructions - Dick SM-100 Operating Instructions Manual

Safety

4.2 Intended use

• The machines SM-90 and SM-100/-100W are designed for commercial use
only and are not intended for mobile use.
• The SM-90 and SM-100/-100W machines can be used for the hand-guided
dry grinding (sharpening) and polishing of cleaned knives and hoof knives.
• The machines are designed exclusively for use in dry interiors at tempera-
tures between +15 and +25 °C.
• Only original spare parts and accessories from Friedr. Dick GmbH & Co.KG
may be used.
Any other or additional use is deemed to be not as intended and therefore
misuse.
• The machine must not be used, among other things, for grinding materials
that produce harmful or highly flammable dusts. These include, for
example:
– Aluminium
– Magnesium
• The machine must not be switched on or operated in a potentially
explosive atmosphere.
The owner is responsible for any damage caused by misuse.

4.3 General safety instructions

RISK OF INJURY DUE TO INCORRECT HANDLING
The incorrect handling of the machine (e.g. reaching into
abrasives or polishes) may cause blunt injuries, abrasions or
burns.
The machine may only be used by people who
have read and understood the operating instructions,

are familiar with the start-up, operation and maintenance of

machines and the applicable accident prevention regulations,
recognise the dangers that occur during work and work

reliably,
The machine may not be operated outside the given power

ranges (see 5.1 Technical data),
Only operate the machine only for its approved uses (see

4.2 Intended use).
WARNING
Operating Instructions SM-90/-100/-100W
4
11