Equipment Maintenance; Platform Plate Removal And Maintenance; Optical Axis Maintenance - Creality Ender-3 V3 User Manual

7.Equipment Maintenance

7.1 Platform plate removal and maintenance

① a. When printing is finished, wait for the platform plate to cool
before removing the printing platform with the model attached;
b. Slightly bend the platform with both hands to separate the
model from the platform.
Tips: 1. Don't bend too much for daily use to prevent deformation and unusability;
2. The printing platform is a perishable part, and it is recommended to replace it regularly to ensure that the first layer of the model sticks properly.

7.2 Optical axis maintenance

It is recommended to purchase lubricating grease for regular maintenance of the optical axis area.
Optical axis area of Z direction
② If there are residual filaments on the
platform plate, scrape them off lightly
with a blade and print again.
Optical axis area of X & Y direction
20
③ If the first layer of the model is not
properly glued, it is recommended
to apply solid adhesive evenly on
the surface of the platform plate
before preheating for printing.
Optical axis area of X direction
Optical axis area of Y direction