About The User Interface - Creality Ender-3 V3 User Manual

4.About the Power-on Guide and User Interface

4.2 About the User Interface

Home
* You can configure functions such as extruder
temperature and hotbed temperature through
the homepage;
Prepare
* You can configure functions such as axis movement/temperature control, extrude/retract, and fan cooling through the preparation interface.
The current interface is for reference only. Due to the continuous upgrading of functions,
it shall be subject to the latest software/-firmware UI published on the official website.
Nozzle temperature
Hotbed temperature
Parameters can
be manually set
09