Network Performance Reports - Paradyne 3172 Operator's Manual

Network Performance Reports

Network performance is continuously monitored and
maintained in network aggregate registers (NET) and, if
configured for EDL, in far-end and near-end port
registers.
Network aggregate registers (NET) are status registers
that collect performance data for the previous 24-hour
period. Registers shown on the front panel LCD are listed
in Table 4-3. Aggregate data is updated in 15-minute
intervals. After 15 minutes, the current interval is rolled
over into a set of accumulator registers that represent the
previous 96 15-minute intervals for the register. An
interval total of how many of the 96 registers contain
valid data is also kept, as well as a 24-hour total for each
accumulator register.
Network port performance is continuously monitored
and maintained in internal memory registers when the port
interface is configured to use EDL. The E1 DSU/CSU
maintains two sets of port registers for each synchronous
data port: far-end port registers and near-end port
registers. These registers are status registers that collect
performance data for the previous 8-hour period.
Registers shown on the front panel LCD are listed in
Table 4-3. Port data is updated in 15-minute intervals.
After 15 minutes, the current interval is rolled over into a
set of accumulator registers that represent the previous 32
15-minute intervals for the register. An interval total of
how many of the 32 registers contain valid data is also
kept, as well as a 8-hour total for each accumulator
register.
To display a network aggregate (NET) Performance
Report on the front panel LCD:
"
Procedure
1. Press F1 to select Stat from the top-level menu
screen.
DSU E1 CEPT
Stat
F1
3170-A2-GB20-30
Test Cnfig
F2 F3
2. From the Status screen, select Perf.
3. Select NET registers.
4. From the NET Registers screen, press F1 to view
current registers (go to Step 5), press F2 to view
24-Hour Totals (go to Step 6), or press F3 to view
15-Minute Interval Registers (go to Step 7).
5. When you press F1 from the NET Registers
screen, the NET registers for the current
15-minute interval appear.
6. When you press F2 from the NET Registers
screen, the NET registers for the 24-hour total
interval appear.
March 1999
Status:
DevHS STest Perf
F3
F1 F2
Performance:
NET Prt1 Prt2
F1 F2 F3
NET Registers:
Cur 24Tot Intvl
F1 F2 F3
NET Current:
Event = xx,xxx
F3
F1 F2
NET 24 Hour:
VldIntvl = xx
F1 F2 F3
Maintenance
4-5