Displaying/Editing Configuration Options - Paradyne 3172 Operator's Manual

ACCULINK 3172 and 3174 E1 DSU/CSU
The configuration options are divided into functional
groups. Appendix C contains a list of the configuration
options and defaults. These groups are:
DTE (Drop/Insert) Interface
Port (Table C-2)
Network Interface (Table
Channel (Tables C-4
General (Table C-6)
User Interface (Table
Alarm (Table C-8)
General SNMP (Table
SNMP Trap (Table C-10)
Use the Configuration (Cnfig) branch of the front panel
menu tree to display or change E1 DSU/CSU
configuration options (see Appendix A,
Menu).

Displaying/Editing Configuration Options

To display/edit configuration options:
"
Procedure
1. Press F3 to select Cnfig from the top-level menu
screen.
DSU E1 CEPT
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
3-12
(Table C-1)
C-3)
and C-5)
C-7)
C-9)
Front Panel
Test Cnfig
F3
F2
Cust1
F2 F3
3. Press F1 to select Edit.
4. From the Edit screen, select the functional group
you want to edit by pressing the appropriate
Function key. Use the scroll keys, if necessary.
(The NET selection is shown as an example only.)
The configuration options for the selected
functional group appear on the front panel one
option at a time. The option name appears on
Line 1 with the current value next to it. To reach
other options, use the Next and Previous
selections to scroll forward and backward through
the group of options.
5. Press the appropriate Function key to choose
another value. Use the scroll keys, if necessary.
6. Use the Save procedure to save your changes to
the Active or Customer area.
March 1999
Choose Funct:
Edit Save
F3
F1 F2
Edit:
DTE Port NET
F1 F2 F3
NET Frame:noCRC
Next CRC4 noCRC
F1 F2 F3
3170-A2-GB20-30