Paradyne 3172 Operator's Manual page 57

7. From the DTE Channels screen, press F1 to select
TS16.
DTE Channels:
TS16
F1
8. Rsvd (Reserved) is the default for TS16. This
indicates that time-slot 16 is reserved for signaling
information. Pressing F1 (Data) makes
time-slot 16 available for data.
TS16:Rsvd
Data
F1
NOTE
If TS16 is reserved for signaling,
D16 will automatically be
assigned to N16, and DTE DS0
channels allocated to the network
interface must be connected to
the corresponding channel (e.g.,
D1 to N1, D2 to N2, etc.).
9. Press from the TS16 screen to return to the
DTE Channels screen.
TS16:Rsvd
Data
F1
3170-A2-GB20-30
Assign
F3
F2
Rsvd
F2 F3
Rsvd
F2 F3
10. From the DTE Channels screen, press F2 to select
Assign.
11. Press the Function key below the network channel
desired. Each time that you press the Function
key, the DTE channel number will scroll up one
number. If the network channel is currently
unassigned (''–" is displayed on Line 2), the DTE
channel number initially displays the same
number as the corresponding network channel
number. However, if the network channel is
currently assigned, the DTE channel number is
shown as Dn. Pressing the Function key for D31
wraps the display back to D1. Only those channels
that are not already assigned will appear on the
LCD when scrolling. The network channels
assigned to ports (Prt1...Prt4) are unavailable for
assignment.
March 1999
DTE Channels:
TS16 Assign
F3
F1 F2
N1 N2 N3
D1 D2 –
F1 F2 F3
Operation
3-31