Paradyne 3172 Operator's Manual page 100

ACCULINK 3172 and 3174 E1 DSU/CSU
Far-end: Disab
Next Disab Maint
Far-End Performance Statistics. Specifies whether to monitor for far-end performance report messages (PRMs) and
maintain far-end performance registers for a particular port.
Disab – Disables far-end performance statistics.
Maint – Monitors the port's EDL for PRMs and maintains far-end performance statistics.
NOTE: This configuration option is not available and does not appear if EDL is disabled.
NOTE: If the local E1 DSU/CSU is configured to maintain far-end performance statistics, then the remote E1 DSU/CSU
must be configured to send near-end performance statistics.
Mgmt Link: Disab
Next Disab SNMP
EDL Management Link. Specifies whether the EDL management link is enabled for a particular port. Selecting SNMP
allows SNMP management traffic to flow over the 4 kbps in-band data link provided by EDL.
Disab – Disables the port's EDL management link.
SNMP – Enables the port's EDL management link.
NOTE: This configuration option is not available and does not appear if EDL is disabled or FDL is enabled for SNMP.
NOTE: If the local E1 DSU/CSU's EDL is enabled, then the remote E1 DSU/CSU's EDL must also be enabled.
C-6
Port Configuration Options
Prev
Prev
Table C-2
(4 of 4)
March 1999 3170-A2-GB20-30