Resetting The E1 Dsu/Csu; Download Operations - Paradyne 3172 Operator's Manual

ACCULINK 3172 and 3174 E1 DSU/CSU
3. From the Control screen, select Rel (Release).
Control:
Rel
F1
The active user interface is released. A screen with
this message appears. No user interface is active
until input is received from a user interface.
Ft. Panel:
Released
F1

Resetting the E1 DSU/CSU

Use the Reset command to perform a power-on reset of
the E1 DSU/CSU.
To reset the E1 DSU/CSU:
"
Procedure
1. Press the key once to display the Ctrl
selection on the top-level menu screen.
DSU E1 CEPT
Stat
F1
2. Press F3 to select Ctrl from the top-level menu
screen.
3. From the Control screen, press the
the Reset selection appears on the screen.
Control:
Rel
F1
3-36
LED ClrReg
F3
F2
F3
F2
Test Cnfig
F3
F2
key until
LED ClrReg
F2 F3
4. Select Reset.
5. From the Device Reset screen, press F1 to initiate
a reset of the E1 DSU/CSU (the power-up
sequence screen appears). Press F2 instead to
return to the Control screen without initiating a
reset.

Download Operations

The Download command is for
use by service personnel only.
Loss of primary data could result
from improper use.
March 1999
Control:
ClrReg Reset
F3
F1 F2
Device Reset:
Yes No
F3
F1 F2
NOTE
3170-A2-GB20-30