Paradyne 3172 Operator's Manual page 176

ACCULINK 3172 and 3174 E1 DSU/CSU
N
NET (Network) Configuration branch
example of use, 3-12
in the menu tree, A-1
option table, C-7
option worksheet, C-23
network interface
cabling example, 2-8
channel allocation procedure, 3-20–3-26
configuration options, C-7
failure message, 4-2
front panel LED indications, 3-5
functional description, 1-5, 2-1
physical description, 1-4
pin assignments, D-2
technical specifications, B-1
troubleshooting, 4-11
O
objects, SNMP, 1-2, E-1–E-18
OOF (Out Of Frame) condition
ASCII terminal/printer message, 4-9
Device Health and Status message, 4-4
front panel LED indication, 3-5, 3-6
Performance Report message, 4-7
troubleshooting, 4-11
options, strap. See configuration options
P
part numbers, H-1
pattern tests, 4-20–4-23
payload loopback (PLB), 4-16
PBX applications, 2-2
PDV (Pulse Density Violation) condition, 3-6
Perf (Performance Report) branch
example of use, 4-5–4-6
in the menu tree, A-1
performance reporting, 4-5–4-8, C-5, C-6
physical description of E1 DSU/CSU, 1-3–1-5, B-2
pin assignments, D-1–D-15
Point-to-Point Protocol (PPP)
procedure for configuring, 3-16
used with SNMP system, 1-2, 2-3, 2-4, 3-14, F-1
PORT (1– 4) interface, technical specifications, B-2
PORT (1– 4) interface
channel allocation procedure, 3-20–3-26
configuration options, C-3–C-6
failure message, 4-3
front panel LED indications, 3-7
functional description, 1-5, 2-1
managed by SNMP, 1-2
physical description, 1-4
pin assignments, D-7
Index-4
Port Configuration branch
example of use, 3-13–3-14
in the menu tree, A-1
option table, C-3–C-6
option worksheet, C-24
power input
cabling example, 2-8
connector, 1-4, 1-5, D-14
consumption, B-1
optional power sources, 2-5–2-7, B-1, D-14
requirement, B-1
troubleshooting, 4-11
power module, 1-5, B-1
power-up self-test
displaying results, 4-2–4-3
front panel indications, 2-9, 3-5
troubleshooting, 4-11
primary clock
configuration option, C-12
functional description, 3-33
procedure for configuring, 3-34
problem determination. See troubleshooting
protocol, link layer, 3-14, 3-16
Ptrns (Test Patterns) branch
example of use, 4-20–4-23
in the menu tree, A-1
Q
QRSS Test, 4-20
R
RAI (Remote Alarm Indication) condition
ASCII terminal/printer message, 4-9
Device Health and Status message, 4-4
front panel LED indication, 3-5, 3-6
Performance Report message, 4-8
troubleshooting, 4-11
rate
auxiliary port, C-15
communications port, C-14
external clock, C-12
synchronous data port, C-3, C-10
rear panel
connectors. See connectors, rear panel
physical description, 1-3–1-5
switch, 1-4, 1-5
Rel (Release) branch
example of use, 3-35–3-36
in the menu tree, A-1
remote loopback, 4-14
repeater loopback (RLB), 4-17–4-18
reset
front panel indications, 2-9
procedure, 3-36
Reset branch
example of use, 3-36
in the menu tree, A-1
March 1999 3170-A2-GB20-30