nifty Heightrider HR28 Series Operating/Safety Instructions Manual page 34

Table of Contents

Advertisement

Height Rider/SP Series
Operating & Safety Instructions
4.3.4
OPERATION
ALL MODELS
1)
Ensure all red emergency stops are out.
2)
Turn key switch at ground control station to Platform (fully clockwise).
3)
For Battery powered operation, go to step 9).
4)
For Diesel powered operation, go to step 5) or step 7).
HYBRID
5)
COLD ENGINE: - turn the Diesel Glow/Start selector to the Glow position (anti-clockwise). This
engages the glow plug pre-heat system. Hold for 5-10 seconds then turn the key to the Start
position (fully clockwise) and the engine will fire.
6)
WARM ENGINE: - turn the Diesel Glow/Start selector to the Start position (clockwise) and the
engine will fire.
Note: Unless the diesel engine is running, the HR28 Hybrid will automatically default to the electrical
power source (battery).
DIESEL
7)
COLD ENGINE: - turn the Diesel Glow/Start selector to the Glow position (anti-clockwise). This
engages the glow plug pre-heat system. Hold for 5-10 seconds then turn the key to the Start
position (fully clockwise) and the engine will fire. However, there is a time delay dependant on
fuel temperature (Refer to Section 4.2.2, Step 7).
8)
WARM ENGINE: - turn the Diesel Glow/Start selector to the Start position (clockwise) and the
engine will fire.
ALL MODELS
9)
Set the speed selector control as required. Speed I gives minimum function control speed and
Speed III allows maximum function control speed.
10)
Depress the footswitch or push and hold green power button on the platform control panel.
11)
Select one or more functions and operate the appropriate proportional paddles (levers) in full
accordance with manufacturers operating and safety manual.
12)
To return control to the base, turn the base control key-switch to the Base position (centre).
32
NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID
PROPANE OR DIESEL. THESE FUELS ARE FLAMMABLE.
BEFORE OPERATING THE NIFTYLIFT ENSURE THAT EACH OPERATOR HAS READ
AND FULLY UNDERSTOOD THE OPERATING MANUAL. FAILURE TO DO SO MAY
RESULT IN DEATH OR SERIOUS INJURY.
English/USA – 04/15
Original instructions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp85

Table of Contents