Environmental Limitations - nifty Heightrider HR28 Series Operating/Safety Instructions Manual

Table of Contents

Advertisement

2.1.35
2.1.36
The engine must be shut down while fuel tanks are being filled. Fuelling must be done in a well-
ventilated area free of flame, sparks or any other hazard that may cause fire or explosion. PETROL
(GASOLINE), LIQUID PROPANE AND DIESEL FUELS ARE FLAMMABLE.
2.1.37
2.1.38
The operator shall implement means provided to protect against use by unauthorised persons.
2.1.39
Never remove anything that may affect the stability of the machine such as, but not limited to, batteries,
covers, engines, tyres or ballast.
2.2

ENVIRONMENTAL LIMITATIONS

Unless specifically configured otherwise, the machine will have a short operational time in extreme
temperatures such as freezers and cold storage, due to reduced battery performance. For electrical
cables and components, the ambient temperature must be within the range -5°C to 60°C.
The machine is limited in high temperatures because of the cooling requirement for engines and
hydraulic oil. Coolant temperatures must be within the range -37°C to 110°C (at 50% mixture of water
to anti-freeze). Oil temperature must be within the range –23°C to 93°C.
The recommended operational ambient range for these machines is -5°C to +40°C. Please
contact Niftylift Ltd for special considerations if the machine is required to operate outside
these temperatures.
Extended operation in dusty environments is not recommended, as frequent cleaning will be necessary.
All dust, dirt, salt encrustation, excess oil or grease should be removed. Deposits of paint or bitumen,
particularly on legends or labels should be removed.
All standard Niftylift machines are rated for a wind speed of 12.5 m/s, which equates to 45kph / 28mph
or force 6 on the Beaufort scale. No attempt should be made to operate a Niftylift in wind strengths
above this limit and if the operator has any doubts over the wind speed he / she should cease operation
immediately until it can be established that the wind speed has fallen to a safe level.
English/USA – 04/15
Original instructions
When the machine is not in use always stow the booms correctly. NEVER LEAVE
THE KEYS IN THE MACHINE, if it is to be left for any period of time. Use wheel
chocks if leaving on an incline.
NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID
PROPANE OR DIESEL FUEL. THESE FUELS ARE HIGHLY FLAMMABLE
DO NOT USE THE NIFTYLIFT IN ELECTRICAL STORMS
Height Rider/SP Series
Operating & Safety Instructions
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp85

Table of Contents