nifty Heightrider HR28 Series Operating/Safety Instructions Manual page 33

English/USA – 04/15
Original instructions
Diesel engine diagnostic page (HR28D only)
To access this screen, press UP arrow.
(Refer to Section 4.3.2)
It also appears when starting the engine during crank delay
(Refer to Section 4.2.2, Step 7).
Water in fuel
Refer to service manual for instructions on how to drain water from the
diesel fuel filter.
Protection Lamp
Indicates a non electronic problem, e.g. Coolant temperature has exceeded
defined range.
Amber Warning
Engine ECU has detected a malfunction. Refer to Niftylift Service Manual,
Section 6.3.3 for SPN and FMI fault codes.
Red STOP
Indicates severe condition. Turn off engine immediately. Refer to Niftylift
Service Manual, Section 6.3.3 for SPN and FMI fault codes.
Height Rider/SP Series
Operating & Safety Instructions
31