Table of Contents
Advertisement
4.3
PLATFORM CONTROL OPERATION
4.3.1
PLATFORM CONTROL FUNCTIONS
1
Engine Glow/Start/Stop
2
Speed Selector
3
Platform rotation
4
Horn
5
Power to cage
6
Auto Cage Levelling
7
Safety Warning Lamp
8
Digital Gauge
9
Auxiliary Powered Descent
10 Emergency Stop
11 Green Power Button
12 Joystick
* 13 Operates Link Booms
* 14 Operates Upper Boom
* 15 Operates Swing
* 16 Operates Telescoping
* 17 Operates Flyboom
*
More than one function can be operated at the same time
English/USA – 04/15
Original instructions
Anti-clockwise hold for Glow
Booms
Left - Speed I
Drive
Tortoise
RH arrow for Anti-clockwise
Press & hold to Sound
Start engine then Turn clockwise to activate
Flashes when cage angle has exceeded comfortable preset limit. Push
button to re-level cage and restore machine functions.
Indicates Safety Critical Problem
(Refer to Digital Gauge immediately)
See Section 4.3.2
Push and hold to enable boom functions in the event of normal
operation loss. (i.e. Fuel tank empty)
Push to Stop Operation
Push and hold to activate machine
Grip the joystick and hold the trigger switch at the front. Machine
movement is achieved by slowly moving the joystick away from the
neutral position in the required direction. Steer by using the thumb
rocker switch located on top of the joystick.
Up for Up
Up for Up
Left for Left
Up for Tele-In
Up for Up
Height Rider/SP Series
Operating & Safety Instructions
Clockwise to Start/Stop engine
Centre - Speed II
Right - Speed III
Off-road
Hare
LH arrow for Clockwise
Turn clockwise to Release
Down for Down
Down for Down
Right for Right
Down for Tele-Out
Down for Down
27
Advertisement
Table of Contents
