Table of Contents
Advertisement
3.3.3
MONTHLY SAFETY CHECKS
1)
Check the engine oil level (if applicable).
2)
Check wheel nuts are secured (torque 292 ft lbs / 396 Nm).
3)
Check that the slew worm is secured and correctly in mesh. Clean and re-grease.
4)
Check the track rod linkage.
5)
Inspect brakes for operation and wear.
6)
Inspect the engine fuel tank for damage or leaks.
7)
Check telescopic boom wear pads and nylon studs (if applicable).
Every Six months perform a thorough examination in accordance with the 'Lifting Operation
8)
and Lifting Equipment Regulations' (LOLER) 1998, Regulation (9)(3)(a).
3.3.4
ANNUAL SAFETY CHECKS
1)
Check that all pivot pins and their tag bolts are secure.
2)
Inspect for any cracks or badly rusted areas on booms and chassis.
3)
Change the hydraulic oil filters.
4)
Check the bushes in the front wheel hubs for wear.
5)
Check that slew ring bolts are secure (torque 199 ft lbs. 270 Nm).
English/USA – 04/15
Original instructions
Height Rider/SP Series
Operating & Safety Instructions
15
Advertisement
Table of Contents
