Communication Software; Disassembly; Safety Instructions - Burkert 3361 Operating Instructions Manual

24.1

Communication software

The PC software Bürkert Communicator is designed for communication with Bürkert devices.
A detailed description of the installation and operation of the software can be found in the associated
operating instructions.
Download the software from:
24.1.1 büS service interface
The device is equipped with the büS service interface for communicating with the PC. Communication takes
place via a USB interface on the PC and the USB büS interface, which is available as an accessory (see "Table
52: Accessories").
25

DISASSEMBLY

25.1

Safety instructions

DANGER!
Risk of injury due to high pressure and escaping medium.
If the device is pressurised while being disassembled, there is a risk of injury due to sudden depressuri-
sation and medium discharge.
▶ Turn off the pressure before dismantling the device. Vent or empty the lines.
CAUTION!
Risk of injury due to heavy device.
During transportation or installation work, the device may fall down and cause injuries.
▶ Transport, install and remove heavy device with the aid of a second person only.
▶ Use suitable tools.
NOTE!
Installing in the AUTOMATIC operating state will damage the device.
Devices that are installed while they are in the AUTOMATIC operating state may be irreparably damaged.
▶ If devices are to be re-used, set the MANUAL operating state before they are removed.
→
If the device is to be re-used, set the MANUAL operating state.
→
Disconnect the electrical connection.
→
Dismantle the device.
162
country.burkert.com
english
Types 3360 and 3361
Accessories, Wearing parts