Basic Functions; Changing The Operating State, Automatic, Manual - Burkert 3361 Operating Instructions Manual

14

BASIC FUNCTIONS

14.1

Changing the operating state, AUTOMATIC, MANUAL

Factory setting: Devices in their factory default state have their operating state preset to MANUAL.
14.1.1 Changing operating state in devices without a display module
DIP switch 4, which is located under the blind cover, is used to change operating state.
→
To unlock the blind cover, turn it counterclockwise and remove
Devices with ATEX approval or IECEx approval are secured with a magnetic lock.
The removal of the cover is described in the supplementary instructions for the electromotive control
valves with ATEX approval and IECEx approval.
Fig. 48: Setting the operating state
→
Set the operating state with DIP switch 4.
Operating state
AUTOMATIC:
DIP 4  down
→
Close the blind cover.
102
Unlock
blind cover
english
DIP switch
DIP 4: operating state
MANUAL:
DIP 4  up (ON)
Types 3360 and 3361
Basic functions