Table of Contents
Advertisement
3404 Ribbon Drive Cords
Removal
1.
Remove the ribbon drive assembly (3401).
2.
Disconnect the drive cords from the side frames
and remove the cords.
Reinstallation
1.
Attach the spring end of one drive cord to the left
side frame.
2.
Attach the spring end of the other drive cord
e
to
the right side frame.
To left-hand bracket
~
~
G
Print head ___
~
cable
./~
CD
Lower drive cord
3.
Reinstall the drive cord" on the upper clutch
e;
attach the cord to the right side frame. This cord
should be behind the print head cable
G.
4.
Reinstall the drive cord on the lower clutch. as
shown at
e;
attach the cord to the left side side
frame. This cord should be in front of the print
head cable
G.
5.
Reinstall the ribbon drive assembly (3401, steps 2
and 3).
Maintenance Procedures
3-79
Advertisement
Table of Contents
